Go from this.......
In just 10 easy steps!! Transform your dingy basement floor with this DIY! An easy way to turn your basement into an attractive living space. From a Realtors perspective, this is a sure way to catch the attention of a Buyer and create some buzz on your property.
Step 1: Clean your concrete floor of dust, dirt, grease, and any adhesive residue. Tape off your surrounding walls and load your tray with Old Ochre Chalk Paint®. Then paint your concrete floor using a nylon roller. Use a paint brush to paint the edges.
Step 2: Use measuring tape to find the center of your floor. Use a chalk line to trace a straight line from the center to the front of the room.
Step 3: Place your stencil on at the front center of your floor, using the chalk line as a guide. Secure it with painter’s tape.
Step 4: Use a small stencil brush for each of these paints and mixes:
2 parts Scandinavian Pink and 1 part Arles
Load your stencil brush with paint and off-load most of it back onto a paper towel. Use a firm swirling motion to distribute the paint evenly onto the brush and to remove the excess paint.
Step 5: Use a firm swirling motion to stencil the different elements of the stencil with the different colors.
Step 6: Remove the stencil from its first repeat and reposition it to its next repeat. There are registration marks built right into the edges of the stencil so that you can align each repeat perfectly every time. Use the same color scheme to paint the next repeat. Let dry.
Step 7: If paint builds up the stencil, clean the stencil by spraying it with Mosenbockers Lift Off 5, placing it in a plastic bag overnight, and then cleaning it with a scrub brush. Now you have clean stencil to continue working on your floor! Repeat Steps 4 through 6 until you have stenciled the entire concrete floor. Let dry.
Step 8: Use painter’s tape to create a 1 ½” border around the floor. Use a flat paint brush to paint the border with 2 coats of Olive Chalk Paint®, allowing each to dry in between.
Step 9: To protect your gorgeous stenciled floor, apply 1 thin mix of Annie Sloan Lacquer and a small amount of water (up to 10%) with a sponge roller. Let the first coat dry for 1-2 hours. Then apply a second coat of only Annie Sloan Lacquer.Step 10: Let dry overnight before walking on it and showing it off to all of your friends!